Impermax B 1K is a one-component polyurethane-bitumen resin, with high thixotropy and excellent mechanical properties.
It is specially designed for the execution of difficult details and finishes in waterproofing projects with asphalt fabric and other membranes, guaranteeing the continuity and tightness of the system.
It has a high adherence to different types of supports, especially to asphalt fabric (bitumen finish).
Photos of the Waterproofing of the foundations of a single-family house with the Impermax B 1K membrane.
Antibacterial Flooring
Microorganisms are present in our environment naturally, although most are harmless or even beneficial, some of them are dangerous to health.
The inclusion of the biocide inside the material represents a paradigm shift in which the hygiene of the material is not forced from the outside but is constantly actively maintained by the product itself, which substantially increases the hygienic levels of the environment.
Case study of the month: Bridge deck over the M-40, Madrid
This month of August were completed the waterproofing of the bridge deck and the extension of the asphalt tread layer on the new M-40 highway bridge, near Madrid.
The waterproofing system described in ETA certificate number 16/149 of Impermax Polyurea H Flex was applied.
This was a huge work, and to increase productivity and also the quality of execution, the polyurea was applied with the help of the new RAYSTON SPRAY ROBOT, optimized by the technical application team of Krypton Chemical.
1. State of the concrete support.
2. Appearance after applying the primer and sprinkle dry aggregate over it.
3. Polyurea application with the Rayston Spray Robot.
4. Appearance of the waterproofing membrane, totally continuous, without joints or overlaps, or pores.
5. Application of the protective and adhesion layer of the asphalt. Resin plus dusting of aggregate in fresh.
6. Asphalting over Impermax Polyurea H Flex waterproofing system.
The arrival of good weather drives the rehabilitation and reconditioning of sports facilities, whether indoors or outdoors.
This type of facility usually has a multipurpose surface in which various collective sports are practiced, normally defined by lines and colored areas of different shades.
This type of installation requires a high resistance to abrasion, that is non-slip and UV resistant.
Therefore Krypton Chemical is committed to a solution consisting of an epoxy primer base, selected aggregates and a water-based polyurethane seal, which offers UV resistance and stability and great resistance to wear.
Case study of the month Waterproofing of a drinking water tank in a luxury hotel in Spain
Polyurea Rayston is a pure resin of pure Polyurea that has a CE marking certificate according to EN-1504-2 for the surface protection of concrete.
This membrane has an excellent ability to bridge over the cracks in the support (class A5 static and B.4.2 dynamic, the maximum possible). It is also certified for a continuous contact with drinking water according to WRAS (United Kingdom), the Italian D.M. 6 Aprile 2.004 and the European 98/83/CE equivalent to Spanish RD 140/2.003.
The application of polyurea coating with the help of a robot is becoming more frequent, especially in roofswide open areas, where a robot can advance thousands of meters without encountering any obstacle.
The advantages of applying a polyurea with a robot are greater productivity and higher quality of execution (more homogeneous thickness and adjusted to the project requirements). The robot does not get tired and is just as efficient early in the morning and late in the afternoon, after a long working day, either in hot or cold weather.
Some savings in application costs are evident (derived from higher productivity), others, for example, can be achieved thanks to automation and electronic controls on the equipment, so polyurea overconsumption may be avoided.
Krypton Chemical offers to his clients technical advice, even on site, to help them implement this new technology of the 21st century.
Polyurea H SL Mechanized systems with high performance and high productivity
Polyurea H SL is a two component modified polyurea resin that is hot spray applied.
Although it is a fast curing product, it is slightly slower and therefore more self-leveling than other hot-applied polyureas and polyurethanes. This results in a continuous, resilient pavement with a smooth or textured finish obtained by applying quartz and sealing it off with a Kryptanate, fast-curing polystyrene paint, thereby achieving a non-slip surface.
POLYUREA H SL – Advantages:
This Polyurea H SL has been designed for self-leveling floors, creating a slower curing product respecting the times of a fast curing material, for an excellent finish.
Fast execution that allows applying up to 800 m2/day.
Excellent commissioning times,
Very good resistance to ultraviolet radiation (offers color change if not protected with an aliphatic topcoat),
Waterproof and non-porous,
Possibility of making a non-slip floor,
High adherence to multiple substrates,
Resistant to abrasion, impact and wear (consult FT),
Wide range of colors.
POLYUREA H SL – Application´s examples:
Is used as a basecoat for self-leveling systems, the system consists of a first coat of epoxy primer 100, after 6-8 h depending on environmental conditions, application of 2 kg/m2 of optional Polyurea H SL powder of added to achieve a rough surface, after 4 h we will proceed to seal the system using an aliphatic top layer type (Kryptanate).
In interior areas with poor ventilation, we recommend the use of BLM 4800 Portable Master Extractor air extraction mechanisms. Fields of application, we will use the system in residential pavements, parking lots, industrial applications, warehouses, commercial areas, restaurants.
Case study of the week Waterproofing of the entrance courtyard of a single-family house with a decorative quartz-color finish
Project located in Portugal, carried out with the help and technical support of Globalpur (distributor of Krypton Chemical for Portugal).
In this case, the new single-component, fast-curing, high-performance polyurethane membrane, reference Impermax SF, was applied. This resin is totally free of solvents (no odor), that makes the application, transport (not ADR) and storage (non-flammable) easier.
High performance and high productivity hot spray flooring systems
POLYUREA H SL – FAST CURING SELF LEVELLING SPRAY SYSTEM
POLYUREA H SL is a bicomponent modified polyurea resin that is applied by hot spraying. Even being a fast-curing product, it is slightly slower and therefore more levelling than other polyureas and hot spray-applied polyurethanes. This results in a continuous, elastic flooring system with either a smooth or a textured anti-skid topcoat. The latter can be achieved by broadcasting quartz sand to saturation onto the fresh product, and sealing the surface with a fast-curing polyaspartic coating like Kryptanate 100 or 100 LV.
POLYUREA H SL has been designed for the application of self-levelling floor coatings, with a shorter curing time that still provides excellent, smooth looking finish.
POLYUREA H SL – ADVANTAGES
Fast execution allows to apply up to 800 m2 per day.
Shorter cycle times minimise time and space occupation at job sites.
Waterproof and non-porous Possibility of making a non-slip floor by simple sand broad- cast.
Good adhesion to multiple substrates.
Resistant to abrasion, impact and wear (see TDS).
Wide range of colors available
Contains raw materials from renewable sources.
Case study of the week Terrace refurbished with the IMPERMAX SF system, totally solvent-free system
Treatment with a continuous waterproofing system applied with a roller in liquid form. Solvent-free at all stages of the process:
Primer, membrane (IMPERMAX SF) and aliphatic protective finish.
IMPERMAX SF is a 100% solids, non-flammable, solvent-free (odourless) polyurethane resin that once cured forms a highly resistant elastomeric membrane.
Impermax SF resin has no limitations neither in transportation (not ADR) nor in storage. It is easy and comfortable to apply, allowing you to achieve a final result of excellent quality.
The Krypton Chemical Quality Management System has been audited and, according to the requirements of the ISO 9001: 2015 standard.
We continue to work continuously to offer you an always better service, in all of the 70 countries where Krypton Chemical has a presence.
Case study of the week Bridge deck waterproofing in the Aragonese Pyrenees
Despite having a very rainy month of April, especially in the Aragonese Pyrenees, the waterproofing of one of the two lanes of a bridge deck over the Aragón river has been completed with high speed, efficiency and success.
A polyurea membrane has been applied following the system certified according to ETA number 16/149 for the waterproofing of bridge decks.
Application of TECNOCEM tricomponent mortar on a very wet suport. TECNOCEM is resistant to negative pressures and also allows regularizing this support.
IMPERMAX POLYUREA H FLEX membrane application.
Protective topcoat appearance. The system is now ready to receive the hot asphalt.
In this sense, Krypton Chemical launches its new waterproofing membrane and Radon gas barrier, cold liquid-applied, specially designed for small repairs and sealing.
IMPERMAX 2K M is a continuous, thermosetting, elastomeric membrane, easy to apply by brush, roller or trowel. High performant as a Radon gas barrier (Radon gas diffusion coefficient lower than 1.5 x 10-12 m2/s), either without reinforcement or with a fleece reinforcement (mostly for details and seals). Also note that IMPERMAX 2K M is a completely solvent-free resin formulated with renewable raw materials of vegetable origin.
In short, a resin that is friendly with the environment and with our health, unique in the market.
A multi-faceted flooring
Krypton Chemical works on the continuous improvement of its solutions, that is why we are committed to an environmentally friendly floor covering. PAVISOFT is a high performance coating, based on a two-component polyurethane that has the advantages of being a totally solvent-free (odorless) resin, crack-bridging ability.
Moreover to a CE marking, it presents a new certificate that ratifies the percentage of raw material of plant origin (renewable) in its composition. The test, based on the carbon-14 technique, has been performed in a prestigious laboratory in Miami, USA.
As well as the certification for the absorption of impact noise according to UNE ‐ EN ISO 10140‐1: 2016 – UNE ‐ EN ISO 10140‐3: 2011 + A1: 2015 reaching an absorption of -17dB.
Case study of the week Waterproofing and protection of concrete with Polyurea Rayston
These concrete boxes for the conduction and supply of drinking water were waterproofed with the POLYUREA RAYSTON in a workshop. Once installed and fixed in its final location, the continuity of the membrane and, therefore, the watertightness of the conduction will be guaranteed with a new on-site application of POLYUREA RAYSTON, only on the overlaps.
Besides its role as a waterproofing membrane and concrete protection, POLYUREA RAYSTON coating helps to increase the flow of water through the pipes, thanks to the reduction of the friction coefficient (certified by an independent laboratory)
The PAVISTONE series uses a combination of natural aggregates with the mixture of polyurethane resins formulated with more than 60% of raw materials from renewable sources. INCREASE the possibilities of creation for your recreational area with an EXCLUSIVE design, intended for applications such as showrooms, offices, swimming pools, pathways, gardens.
TELL US ABOUT YOUR PROJECT WE WILL HELP YOU WITH EVERYTHING NECESSARY!
Advantages
Choice of natural aggregates
Highly decorative
Warm and soft
Cohesive flooring
Draining
Anti-slip
Rehabilitation of a terrace with PU foam and Impermax Polyurea H Flex top coat (aluminum color)
On a flat terrace with some water infiltrations, was applied a polyurethane foam, RAYSTON SPRAY FOAM 50, to improve thermal insulation, but also as a bonding and regulating layer for the substrate. For waterproof, the IMPERMAX POLYUREA H FLEX membrane (aluminum color) was chosen.
This special color is maintained over time, so in this case an aliphatic protective top coat is not needed. IMPERMAX POLYUREA H FLEX presents an ETA certificate and a hail resistance certificate, among others. In short, an ECONOMIC treatment, with HIGH PERFORMANCE and DURABILITY, applied in two simple times.
From Krypton Chemical we want to send you a message of strength to fight together against COVID-19, and our most sincere thanks to those who are helping us from the front line (SANITARY, SECURITY FORCES, TRANSPORTATION COMPANIES, FOOD SECTOR … ).
During these last weeks we have adapted our activity to mandatory confinement and remote work. Thanks to this, we can continue offering our services to all clients and partners around the world, now online: Advice on the preparation and writing of technical prescriptions. Training and formation in liquid waterproofing (cold and hot), resin flooring, etc. Technical assistance in the application of our products.
We would like to maintain this level of service during this difficult time for everyone, and for this we invite you to ASK as much as you need, and we promise to schedule and meet all your requests. Ideally, we would like to be able to have virtual meetings with each and every one of our partners around the world, with a specific agenda and in order to continue collaborating more closely in the future.
A big hug to everyone!
Hugo Herault, CEO Krypton Chemical
Until the good is better, and the best, spectacular
EP NIVEL Get reinvented!
Dear Customer, We know that you want the best for your projects, and that’s how we want it. For this reason we never settle for something good if it can be even better. We have improved the formula of our EP NIVEL, self-leveling epoxy for floors. What does this mean for you?
More economical
Better resistance to abrasion
High brightness
New format A + B = 25kg
The new formula will be delivered on all orders from Monday, April 6. If you have any questions, please do not hesitate to contact your usual agent.
Thank you for your attention and trust.
Increased service life and reduced maintenance costs in wastewater treatment plants (urban / industrial)
The bacterial decomposition of organic matter in wastewater treatment plants, also in biogas digesters, generates highly corrosive acid compounds for concrete: Hydrogen Sulfide (H2S) and Sulfuric Acid (H2SO4).
The waterproofing of water tanks and pipes with a polyurea membrane, in addition to preventing water leaks, protects the concrete from the corrosion generated by these acids, reducing maintenance costs and increasing lifetime of the facilities.
POLYUREA RAYSTON, is certified according to the EN-1504-2 standard for the protection of concrete structures. It is a thermosetting and elastomeric membrane with excellent ability to bridge over the possible fissures in the support (certified class A5 static and certified B.4.2 dynamic, the highest possible classifications). And it also has exceptional chemical resistance against these acids, under the conditions of a treatment plant (certified class III, also the maximum possible).
Case study of the week Rehabilitation in the Slide and Splash water park, in Portugal
Krypton Chemical has made two different systems for two types of needs that were presented to us in the same project. System 1: streets and waterways. We detail the steps:
Preparation of the support by diamond cutting and vacuuming.
First coat application HUMIDITY PRIMER,
Application of a second coat of RAYSTON EPOXY 100,
Hot application of RAYSTON FLOOR D50 basecoat,
POROSITY SEALER extension as a union bridge, applied by roller,
Application of a first layer of PAINTCHLORE 2K, two-component polyurethane with resistance to chlorine, manual application with roller,
Application of 2 coats of PAINTCHLORE 2K applied by roller.
Second system, the pools:
Surface Preparation
Application of TECNOCEM,
Application of a the primer RAYSTON EPOXY 100, by roller,
Projection of the waterproofing membrane POLYUREA RAYSTON,
Sealed with three layers of PAINTCHLORE 2K, two-component polyurethane with resistance to chlorine, manual application by roller.
On construction sites, it is important to keep downtime and costs to a minimum. Krypton Chemical helps the industry save time and money by offering polyaspartic based solutions. We could colloquially define a PAS as a cold applied aliphatic polyurea (either roller, trowel or airless), or with electrical / hydraulic machines such as those used to apply conventional polyureas. Thanks to their characteristics, polyaspartics are a good option for highly resistant, durable floor coverings with excellent mechanical properties. Also thanks to its fast curing, polyaspartics are widely applied on industrial floors, shortening the application time and allowing a quick commissioning of the pavement.
Advantages
High speed of execution,
Available in manual application or hot spray,
Excellent quality of top coat, high gloss, stability to light and UV rays,
High properties and resistance,
Flexible version (KRYPTANATE M FLEX),
Low viscosity (New KRYPTANATE 100 LV),
Versions without VOC,
Color according to RAL chart,
Different top coat options,
As a protection for waterproofing membranes, the IMPERTOP range, free of solvents, will be applied. IMPERTOP SPRAY and IMPERTOP FAST 2K SF.
Rayston Spray Gun Polyurethane cold spray and Polyurea
The RAYSTON SPRAY GUN is specially designed for jobs where rapid application is required.
The RAYSTON SPRAY GUN portable system is also ideal for 2-component coating repairs and maintenance work. This autonomous system only requires an air connection. An integrated air flow control regulator allows the user to operate this system with one hand, making the RAYSTON SPRAY GUN a unique and easy-to-use solution.
Case study of the week Cover encapsulation with asbestos fibers (area of 800 m2, Mallorca)
Problem: Fiber cement roof (with asbestos) with problems of water infiltration inside. The replacement of the current roof and the construction of a new roof were ruled out due to its high cost and because it implied the total stoppage of the company’s activity for several months.
Solution: We opted to do a treatment on top of the current roof, of course preventing asbestos fibers from escaping into the environment. The applied system consisted of a 50 density polyurethane foam, RAYSTON SPRAY FOAM 50, a hot applied polyurea waterproofing membrane and the aliphatic protective top coat of COLODUR white pigmented, “cool-roof” type. With a single action, four important objectives were achieved: solving the problems of water infiltration, improving the thermal insulation of the roof, encapsulating the asbestos (system with certificate of encapsulation) and ultimately lengthening the useful life of the roof (ETA certificate for 25 years).
In addition, before the treatment, supports for photovoltaic panels were installed (cf picture), to avoid perforating the waterproofing system. In short, with a simple treatment it was possible to improve the sustainability of the roof and the entire building. Finally, it should be noted that the reflective white top coat of COLODUR will allow optimizing the electricity production of these photovoltaic panels, by significantly reducing the surface temperature of the roof.
Impermax 2K M is a performant waterproofing membrane, based on a two-bicomponent polyurethane that has the advantages of being a solvent-free resin (odorless) and with the possibility of being applied in a single layer (2 kg/m2) on horizontal surface, wet-on-wet system.
In addition to a CE quality mark, it presents a new certificate that confirms the percentage of vegetal material of plant origin (renewable) in its composition. The test, based on the Carbon-14 technique, has been performed in a prestigious laboratory in Miami, USA.
SINGULAR WORK OF THE MONTH: WATERPROOFING OF A SUPERMARKET ROOF IN ZARAGOZA
After confirming the high cost in time and money necessary to regularize the roof of this building, it was decided to propose a floating system, not fully adhered to the support. The solution, exclusive of Krypton Chemical consists of the extension and fixation of the special non-woven fabric (NMDC technology) of Geomax Spray 200 and the subsequent application of a continuous Polyurea Rayston membrane. The system guarantees the complete watertighness of the roof with the creation of a continuous elastomeric waterproofing membrane.
YOUR FREE PASS FOR Advanced Engineering UK fair on October 2019
From 30 & 31 October 2019, KRYPTON CHEMICAL will be present as an exhibitor at the Advanced Engineering fair, NEC, Birmingham. Download your free pass HERE or write to marketing@kryptonchemical.com
YOUR FREE PASS FOR SWIMMING POOL & WELLNESS FAIR
From 15 to 18 October, 2019, KRYPTON CHEMICAL will be present as an exhibitor at the PISCINA & WELLNESS fair, Barcelona, Gran Via. To get your free pass write to marketing@kryptonchemical.com
Utilizamos cookies para asegurar que damos la mejor experiencia al usuario en nuestra web. Si sigues utilizando este sitio asumiremos que estás de acuerdo.Vale